Pedestrian (PUMA)

Vulkem® EWS with PUMA Technology is designed to have tenacious adhesion and extreme abrasion resistance. It can be walked on in one hour, which will minimize operation disruption. Vulkem Extreme Wearing System (EWS) is a waterproof traffic deck coating system that utilizes polyurethane- methacrylate (PUMA) technology. Vulkem EWS is composed of a primer (Tremco PUMA Primer), a base coat (Tremco PUMA BC), and a top coat (Tremco PUMA TC). All system components are cured using Tremco PUMA Initiator. Basic Uses Vulkem EWS is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of chloride, deicing salts, chemicals, gasoline, oils and anti- freeze. The Pedestrian System is ideal for stadiums, balconies and pool decks.

Vulkem® 350/351

Pedestrian Coating System Vulkem® 350/351 is a composite waterproofing system comprised of toughcuring liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 350/351 may be used to apply a seamless, monolithic waterproof membrane to concrete and primed metal surfaces. Basic Uses Vulkem 350/351 is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system.

Vulkem® 350NF/351

Pedestrian Coating System Vulkem® 350NF/351 is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 350NF/351 may be used to apply a seamless, monolithic waterproof membrane to concrete and primed metal surfaces. Basic Uses Vulkem 350NF/351 is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces, and similar applications requiring an elastomeric waterproofing system.

Vulkem® 350NF/351NF

Neighbor-Friendly Pedestrian Coating System Vulkem® 350NF/351NF is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 350NF/351NF may be used to apply a seamless, monolithic waterproof membrane to concrete, well-anchored AC plywood, and primed metal surfaces. Basic Uses Vulkem 350NF/351NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system.

Vulkem® 350NF/950NF

Pedestrian Coating System - Low Odor/Fast Cure Indoor Vulkem® 350NF/950NF is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 350NF/950NF may be used to apply a seamless, monolithic waterproof membrane to concrete, to well-anchored AC plywood, and to primed metal surfaces. Basic Uses Vulkem 350NF/950NF is ideal for mechanical rooms and similar interior applications requiring an elastomeric waterproofing system.

Vulkem® 350NF/951NF

Pedestrian Coating System - Low Odor/Fast Cure Vulkem® 350NF/951NF is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 350NF/951NF may be used to apply a seamless, monolithic waterproof membrane to concrete, to well-anchored AC plywood, and to primed metal surfaces. Basic Uses Vulkem 350NF/951NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces, and similar applications requiring an elastomeric waterproofing system.

Vulkem® 360NF/351

Pedestrian Coating Waterproofing System Vulkem® 360NF/351 is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 360NF/351 may be used to apply a seamless, monolithic waterproof membrane to concrete and primed metal surfaces. Basic Uses Vulkem 360NF/351 is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces and similar applications requiring an elastomeric waterproofing system.

Vulkem® 360NF/950NF

Pedestrian Coating Waterproofing System Low Odor/Fast Cure Indoor Vulkem® 360NF/950NF is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 360NF/950NF may be used to apply a seamless, monolithic waterproof membrane to concrete, well-anchored AC plywood, and to primed metal surfaces. Basic Uses Vulkem 360NF/950NF is ideal for mechanical rooms and similar interior applications requiring an elastomeric waterproofing system.

Vulkem® 360NF/951NF

Pedestrian Coating Waterproofing System Low Odor/Fast Cure Vulkem® 360NF/951NF is a composite waterproofing system comprised of tough-curing liquid polyurethane. It cures to form a rubber membrane surface that provides a lasting and easy-to-clean coating. Textured surfaces for pedestrian traffic will use an aggregate-laden top membrane to aid in wear and slip resistance. Vulkem 360NF/951NF may be used to apply a seamless, monolithic waterproof membrane to concrete, well-anchored AC plywood, and primed metal surfaces. Basic Uses Vulkem 360NF/951NF is ideal for plazas, recreation decks, balconies, mechanical rooms, stadiums, athletic surfaces, and similar applications requiring an elastomeric waterproofing system.

Vulkem® OC810

One-Coat, Low-Odor, Low-VOC Deck Coating for Light Pedestrian Applications Vulkem® OC810 Coating is a high-solids, aliphatic urethane membrane designed to be applied in one coat as a waterproofing system. A minimum thickness of 25 mils is required. Vulkem OC810 must be used with Tremco Rubber Aggregate 12-20 mesh. Basic Uses Vulkem OC810 Coating is ideal for light pedestrian traffic areas such as balconies, roof terraces, and mechanical rooms. It also can be used as a waterproofer for window eyebrow applications.

Vehicular (PUMA)

Waterproof Traffic Coating System-Vehicular System Ready for Use 1 Hour After Application Vulkem® EWS with PUMA Technology is designed to have tenacious adhesion and extreme abrasion resistance. It can be walked on in one hour, which will minimize operation disruption. Vulkem Extreme Wearing System (EWS) is a waterproof traffic deck coating system that utilizes polyurethane- methacrylate (PUMA) technology. Vulkem EWS is composed of a primer (Tremco PUMA Primer), a base coat (Tremco PUMA BC), an intermediate wear coat (Tremco PUMA WC) and a top coat (Tremco PUMA TC). All system components are cured using Tremco PUMA Initiator. Basic Uses Vulkem EWS is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of chloride, deicing salts, chemicals, gasoline, oils and anti- freeze. The Vehicular System is ideal for ramps, helical turns and ticket splitters.

Vulkem® 350/346/346

Elastomeric, Waterproof Traffic Deck Coating System Vulkem® 350/346/346 is a modified polyurethane traffic deck coating system composed of a base coat (350), heavy duty intermediate coat (346) and a top coat (346). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350/346/346 is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 350/950NF/950NF

Vehicular Coating System - Elastomeric, Waterproof Indoor Vulkem® 350/950NF/950NF is a modified polyurethane traffic deck coating system composed of a base coat (350), heavy duty intermediate coat (950NF) and a top coat (950NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350/950NF/950NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 350/950NF/951NF

Vehicular Coating System - Elastomeric, Waterproof Vulkem® 350/950NF/951NF is a modified polyurethane traffic deck coating system composed of a base coat (350), heavy duty intermediate coat (950NF) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350/950NF/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 350/951NF/951NF

Vehicular Coating System - Elastomeric, Waterproof Vulkem® 350/951NF/951NF is a modified polyurethane traffic deck coating system composed of a base coat (350), heavy duty intermediate coat (951NF) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350/951NF/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 350NF/346/346

Vehicular Coating System - Elastomeric, Waterproof Vulkem® 350NF/346/346 is a modified polyurethane traffic deck coating system composed of a base coat (350NF), heavy duty intermediate coat (346) and a top coat (346). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350NF/346/346 is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 350NF/950NF/950NF

Vehicular Coating System - Elastomeric, Waterproof Indoor Vulkem® 350NF/950NF/950NF is a modified polyurethane traffic deck coating system composed of a base coat (350NF), heavy duty intermediate coat (950NF) and a top coat (950NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350NF/950NF/950NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 350NF/950NF/951NF

Vehicular Coating System - Elastomeric, Waterproof Vulkem® 350NF/950NF/951NF is a modified polyurethane traffic deck coating system composed of a base coat (350NF), heavy duty intermediate coat (950NF) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350NF/950NF/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 350NF/951NF/951NF

Vehicular Coating System - Elastomeric, Waterproof Vulkem® 350NF/951NF/951NF is a modified polyurethane traffic deck coating system composed of a base coat (350NF), heavy duty intermediate coat (951NF) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350NF/951NF/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 360NF/346/346

Elastomeric, Waterproof Traffic Deck Coating System Vulkem® 360NF/346/346 is a modified polyurethane traffic deck coating system composed of a base coat (360NF), heavy duty intermediate coat (346) and a top coat (346). Basic Uses Vulkem 360NF/346/346 is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 360NF/950NF/950NF

Vehicular Coating System - Elastomeric, Waterproof Indoor Vulkem® 360NF/950NF/950NF is a modified polyurethane traffic deck coating system composed of a base coat (360NF), heavy duty intermediate coat (950NF) and a top coat (950NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 360NF/950NF/950NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 360NF/950NF/951NF

Vehicular Coating System - Elastomeric, Waterproof Vulkem® 360NF/950NF/951NF is a modified polyurethane traffic deck coating system composed of a base coat (360NF), heavy duty intermediate coat (950NF) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 360NF/950NF/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze.

Vulkem® 350/Epoxy WC/346

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 350/Epoxy WC/346 is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (350), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (346). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350/Epoxy WC/346 is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. It is ideal for high volume traffic areas.

Vulkem® 350/Epoxy WC/950NF

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 350/Epoxy WC/950NF is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (350), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (950NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350/Epoxy WC/950NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze It is ideal for high volume, indoor traffic areas.

Vulkem® 350/Epoxy WC/951NF

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 350/Epoxy WC/951NF is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (350), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350/Epoxy WC/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. It is ideal for high volume traffic areas.

Vulkem® 350NF/Epoxy WC/346

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 350NF/Epoxy WC/346 is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (350NF), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (346). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350NF/Epoxy WC/346 is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. It is ideal for high volume traffic areas.

Vulkem® 350NF/Epoxy WC/950NF

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 350NF/Epoxy WC/950NF is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (350NF), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (950NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350NF/Epoxy WC/950NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. It is ideal for high volume, indoor traffic areas.

Vulkem® 350NF/Epoxy WC/951NF

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 350NF/Epoxy WC/951NF is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (350NF), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 350NF/Epoxy WC/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. It is ideal for high volume traffic areas.

Vulkem® 360NF/ Epoxy WC/346

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 360NF/Epoxy WC/346 is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (360NF), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (346). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 360NF/Epoxy WC/346 is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. It is ideal for high volume traffic areas. It is ideal for high volume traffic areas.

Vulkem® 360NF/Epoxy WC/950NF

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 360NF/Epoxy WC/950NF is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (360NF), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (950NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 360NF/Epoxy WC/950NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. It is ideal for high volume, indoor traffic areas.

Vulkem® 360NF/Epoxy WC/951NF

Epoxy Wear Coat, Waterproof Traffic Deck Coating System Vulkem® 360NF/Epoxy WC/951NF is a polyurethane traffic deck coating system featuring an epoxy wear course. It is composed of a base coat (360NF), heavy duty, aggregate loaded, intermediate coat (Epoxy WC) and a top coat (951NF). This unique waterproofing system is designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to give and work with the concrete slab, bridging the shrinkage cracks. Basic Uses Vulkem 360NF/Epoxy WC/951NF is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. The system will protect the concrete from the damaging effects of water, deicing salts, chemicals, gasoline, oils and anti-freeze. It is ideal for high volume traffic areas.

Decorative Waterproofing (PUMA)

Waterproof Traffic Coating System - Quick Cure Decorative System Decorative waterproofing systems deliver super performance using polyurethane methacrylate (PUMA) technology. This unique chemistry prevents the degradation of deck surfaces from foot traffic and frequent exposure to the elements compared to typical MMA and polyurethane systems. Basic Uses Ideal for pedestrian walkways, balconies, deck and plaza common areas and can match any aesthetic with a variety of approved UV-stable aggregate or chips. Applied over the structural slab and eliminate the additional labor, time and cost associated with split-slab waterproofing that is covered with topping slabs, tile, paver systems or stamped concrete.

Heavy Duty (PUMA)

Vulkem® EWS with PUMA Technology is designed to have tenacious adhesion and extreme abrasion resistance. It can be walked on in one hour, which will minimize operation disruption. Vulkem Extreme Wearing System (EWS) is a waterproof traffic deck coating system that utilizes polyurethane- methacrylate (PUMA) technology. Vulkem EWS is composed of a primer (Tremco PUMA Primer), a base coat (Tremco PUMA BC), an intermediate wear coat (Tremco PUMA WC) and a top coat (Tremco PUMA TC). All system components are cured using Tremco PUMA Initiator. Basic Uses Vulkem EWS is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of chloride, deicing salts, chemicals, gasoline, oils and anti- freeze. The Heavy Duty System is ideal for loading docks and areas requiring snow plow resistance.

Helipad (PUMA)

Vulkem® EWS with PUMA Technology is designed to have tenacious adhesion and extreme abrasion resistance. It can be walked on in one hour, which will minimize operation disruption. Vulkem Extreme Wearing System (EWS) is a waterproof traffic deck coating system that utilizes polyurethane-methacrylate (PUMA) technology. Vulkem EWS is composed of a primer (Tremco PUMA Primer), a base coat (Tremco PUMA BC), and a top coat (Tremco PUMA TC). All system components are cured using Tremco PUMA Initiator. Basic Uses Vulkem EWS is an optimal solution for helipads. Vulkem EWS is a cold-applied, traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of chloride, deicing salts, chemicals, gasoline, oils and antifreeze.

Pool Decks (PUMA)

Vulkem® EWS with PUMA Technology is designed to have tenacious adhesion and extreme abrasion resistance. It can be walked on in one hour, which will minimize operation disruption. Vulkem Extreme Wearing System (EWS) is a waterproof traffic deck coating system that utilizes polyurethane-methacrylate (PUMA) technology. Vulkem EWS is composed of a primer (Tremco PUMA Primer), a base coat (Tremco PUMA BC), and a top coat (Tremco PUMA TC). All system components are cured using Tremco PUMA Initiator. Basic Uses Vulkem EWS is an optimal solution for pool decks and water features. Vulkem EWS is a cold-applied, traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of chloride, deicing salts, chemicals, gasoline, oils and antifreeze.

Vulkem® 801

Heavy-Duty, Aluminized Coating Vulkem® 801 is a liquid-applied, single-component, heavy duty, aluminized polyurethane coating system that has been formulated to have high tensile strength, tear strength and elongation, all in a viscosity grade that can be used horizontally and vertically. This coating forms a tough, weather resistant, waterproof, elastomeric coating for a variety of waterproofing applications that require a weather-resistant coating. Basic Uses Vulkem 801 is suitable for application to substrates that have had loose materials completely removed and major defects repaired and leveled by conventional methods. Vulkem 801 may be used in cooling water tanks* where a high performance protective coating is required that can handle both horizontal and vertical application. It has excellent resistance to ponded water. It can be used in gutter and rainwater applications. Vulkem 801 is often used as a repair to built-up roof decks where a temporary fix is required to fill roof replacement. It is also used to connect inverted roof waterproofing membranes to the exposed parapet that still requires waterproofing, as it features good UV stability.

Vulkem Hybrid Systems (PUMA/Polyurethane)

Vulkem Hybrid Traffic Coating Systems are high-performance vehicular systems integrating chemistries to defend against the most challenging applications. Basic Uses Tremco addresses customer needs for longer-wearing systems capable of withstanding the harshest conditions in parking structures. Vulkem Hybrid Systems incorporate Vulkem EWS for extreme-wear areas such as helical turns, ramps and ticket spitters with Vulkem Polyurethane Vehicular Systems for drive lanes and parking stalls.

Water Features (PUMA)

Vulkem® EWS with PUMA Technology is designed to have tenacious adhesion and extreme abrasion resistance. It can be walked on in one hour, which will minimize operation disruption. Vulkem Extreme Wearing System (EWS) is a waterproof traffic deck coating system that utilizes polyurethane-methacrylate (PUMA) technology. Vulkem EWS is composed of a primer (Tremco PUMA Primer), a base coat (Tremco PUMA BC), and a top coat (Tremco PUMA TC). All system components are cured using Tremco PUMA Initiator. Basic Uses Vulkem EWS is an optimal solution for pool decks and water features. Vulkem EWS is a cold-applied, traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage Additionally, the system will protect the concrete from the damaging effects of chloride, deicing salts, chemicals, gasoline, oils and antifreeze.

Tremco® Epoxy Primer

Two-Part Epoxy Primer Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes. Basic Uses Tremco Epoxy Primer may be applied to the surface of fully cured TREMproof 250GC, ExoAir 120, ExoAir 220, ExoAir 230, TREMproof 6100 HRA, Vulkem 350 and 350NF.

TREMprime Multi-Surface Urethane Primer

TREMprime Multi-Surface Urethane Primer is a two-component, quick-drying, epoxy-based, VOC-compliant primer primarily for use with Vulkem® urethane deck coating and liquid-applied waterproofing products. It may also be used with Vulkem and Tremco branded urethane sealants. Basic Uses Porous surfaces, interlaminary, urethane coatings. Low-VOC (<60 g/L), two-part epoxy primer used to condition and prep porous surfaces and existing coatings for application of a new coating layer. Apply with a short nap roller or brush evenly to the surface. Primer must dry completely before coating application as indicated by turning from milky-white to completely clear.

TREMprime Non-Porous Primer

TREMprime Non-Porous Primer is a low-VOC, water-based, quick-drying, one-part primer used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics. Basic Uses Non-porous surfaces and urethane sealants. A low-VOC, waterbased, quick-drying, one-part primer. TREMprime Non-Porous Primer is not a film-forming primer. It is used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics. Apply with a clean cloth. Remove all excess primer from cloth to ensure a very thin layer is applied. Dry time is 15 min at 70 °F (21˚C). Primer must be completely dry before applying sealant or coating. Urethane sealants and coatings can be applied up to 8 hr after primer has been applied. After 8 hr, the surface must be cleaned with a Tremco approved solvent and reprimed with TREMprime Non-Porous Primer.

TREMprime VB Primer

Two-Component, Epoxy-Based, Vapor Barrier Primer TREMprime VB Primer is a two-component, epoxy-based solvent-free vapor barrier primer for concrete surfaces. Basic Uses TREMprime VB is used to mitigate vapor drive caused by moisture in concrete. It can be used on new and existing concrete slabs on grade.

Vulkem® Primer #171

Vulkem® Primer #171 is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates where Vulkem® urethane sealants, membranes or coatings will be applied. NOT for use in Canada. Basic Uses Porous surfaces, urethane sealants, Vulkem Coating Systems and TREMproof membranes. Quick-drying, one-part, moisture-curing primer. It is used as an adhesion promoter for Vulkem brand urethane sealants and coatings and TREMproof membranes on porous surfaces such as concrete and wood. Apply generously with a clean brush or roller. Do not apply in excess where it will puddle or pond. At 70 °F (21˚C), allow 30 to 45 min for primer to become tacky before applying sealant, coating or membrane. Do not allow primer to dry completely. Do not apply sealant or coating if primer becomes hard or glossy. If it does, clean with a Tremco approved solvent and coat with Vulkem 191 Primer.

Vulkem® 191 Primer

Vulkem® 191 Primer is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat Basic Uses Porous surfaces, interlaminary, urethane sealants, coatings and TREMproof membranes. It is used to prepare surfaces of cured urethane sealants, coatings and TREMproof membranes that will be sealed with a fresh coat. Apply with a clean brush or roller. Do not apply in excess or allow to puddle. Use a short nap roller only. Dry time is 15 to 30 min at 70 °F (21˚C). Apply coating or sealant within 1 to 2 hr after application when primer is still tacky but does not come off substrate. Primer will yellow with time if left exposed. Do not apply in excess to other substrates not intended to be coated. Do not apply sealant or coating if primer becomes hard or glossy. If it does, clean with a Tremco approved solvent and reprime with Vulkem 191 Primer.

Vulkem® 350NF/Tremco® Epoxy Primer

Vulkem® 350NF/Tremco® Epoxy Primer (EP) is an under tile waterproofing system comprised of a tough-curing liquid polyurethane base coat and highly durable, low-modulus epoxy top coat. Vulkem 350NF/EP may be used to apply a seamless, monolithic waterproofing membrane system to concrete, well-anchored AC plywood, and primed metal surfaces. Basic Uses Vulkem 350NF/EP is ideal for plaza decks, pool and recreation decks, balconies, terraces, walkways, athletic surfaces and similar applications requiring a non-exposed elastomeric waterproofing system.

Under Tile (PUMA)

Vulkem® EWS is a cold-applied, waterproofing system that utilizes polyurethane-methacrylate (PUMA) technology. PUMA waterproofing systems offer superior elongation over traditional MMA/PMMA technology systems. Vulkem EWS is composed of a primer (Tremco PUMA Primer), a base coat (Tremco PUMA BC), and a top coat (Tremco PUMA TC). All system components are cured using Tremco PUMA Initiator. Basic Uses Vulkem EWS is ideal for under tile application. Vulkem EWS is a cold-applied traffic deck coating system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of chloride, deicing salts, chemicals, gasoline, oils and anti- freeze.

Proglaze®

Single-Component, Moisture-Cure, Acetoxy Silicone Sealant for Glazing Proglaze® is a single-component, moisture-cure, acetoxy, silicone sealant for a variety of in-field and in-plant glazing applications. Basic Uses Proglaze produces a high-performance seal for a wide variety of glazing applications such as cap bead and metal-to-metal joints. Additional uses include a variety of in-plant applications where a gun-grade sealant is required.

Proglaze® II

Multi-Component, Neutral-Cure, Silicone Sealant for Structural Glazing Proglaze® II is a multi-component, high-modulus silicone sealant consisting of a white base and a black curing agent that, when mixed through a pump, cures to a tough, flexible rubber. Basic Uses Proglaze II is developed specifically for in-plant, 2- and 4-sided structural glazing and curtain wall applications where shortened cure time reduces glazing/sealing production time. All structural glazing applications must be reviewed and approved by Tremco Technical Services

Proglaze® SSG

Single-Component, Neutral-Cure, Silicone Sealant for Structural Glazing Proglaze® SSG is a single-component, neutral-cure, high-modulus silicone sealant ideal for a wide variety of glazing applications. Proglaze SSG offers fast through-cure and exceptional tensile strength. Basic Uses Proglaze SSG is designed to meet the stringent performance needs for both 2- and 4-sided structural and protective glazing, including cap, heel or toe bead. Whether it is a unitized curtain wall manufactured in plant or a fieldglazed project, Proglaze SSG offers fast through cure and exceptional tensile strength to meet the most stringent building codes. All structural glazing applications must be reviewed and approved by Tremco Technical Services.

Spectrem® 1

Single-Component, Moisture-Cure Silicone Sealant Spectrem® 1 is a high-performance, single-component, moisture-cure, ultra-low modulus silicone sealant. Basic Uses Spectrem 1 is the ideal sealant for the most demanding dynamically moving joints. This includes material having a high coefficient of linear expansion such as aluminum curtainwalls, precast concrete panels, metal panels and window perimeters.

Spectrem® 2

Single-Component, Neutral-Cure Silicone Sealant for 2-Sided Structural Glazing Spectrem® 2 is a high-performance, single-component, neutral-cure, medium-modulus silicone sealant. Basic Uses Spectrem 2 is ideal for a variety of perimeter caulking and glazing applications, including 2-sided structural glazing. Spectrem 2 may be used on substrates such as aluminum, glass, steel, painted metal, plastic, stone, concrete and brick.

Spectrem® 3

Single-Component, Non-Staining Sealant with Advanced Silicone Technology Spectrem® 3 is a single-component, neutral-cure, low-modulus, construction grade sealant with patented silicone technology. Non-staining and low polar attraction to dirt increases aesthetic appearance. Basic Uses Spectrem 3 has a patented chemistry that has been specifically formulated to seal porous stone, EIFS, metal panels, masonry and pre-cast concrete joints.

Spectrem® 4-TS

Multi-Component, Non-Staining Sealant with Advanced Silicone Technology Spectrem® 4-TS is a multi-component, low-modulus construction sealant with patented advanced silicone technology. Non-staining and low polar attraction to dirt increases aesthetic appearance. Spectrem 4-TS offers color flexibility with the opportunity to tint the material on site. Basic Uses Formulated for use in dynamically moving building joints with +/- 50% movement. Typical applications for Spectrem 4-TS include EIFS, expansion and control joints, tilt-up panel joints, precast concrete panel joints, and perimeter caulking (windows, doors, panels).

Spectrem® 800

FOUNDER It all begins with an idea. Maybe you want to launch a business. Maybe you want to turn a hobby into something more.

Spectrem® 900SL

Single-Component, Moisture-Cure, Silicone Sealants for Highway and Parking Applications Spectrem® 800 and Spectrem® 900SL are single-component, moisturecure low-modulus, high-movement, gun-grade, parking structure and highway joint sealants. Spectrem 900SL is self-leveling. Basic Uses Spectrem 800 and Spectrem 900SL are formulated for highway, airport and bridge joints, and parking structures where high movement occurs.

Tremsil® 200

Single-Component, Acetoxy Silicone Sealant Tremsil® 200 is a single-component, acetoxy silicone sealant. Tremsil 200 cures to a flexible rubber when exposed to moisture present in the air. Basic Uses Tremsil 200 produces a weathertight seal to glass, metal, porcelain, ceramic and most painted surfaces. Tremsil 200 sealant is suitable for use in kitchens, bathrooms and spas.

Tremsil® 400

Single-Component, Neutral-Cure Silicone Sealant Tremsil® 400 is a high-performance, single-component, neutral-cure, medium-modulus silicone sealant. Basic Uses Tremsil 400 is specifically designed to achieve a watertight seal in expansion joints, and for general perimeter caulking of windows, doors and frames, precast and tilt-up panels.

Tremsil® 600

Single-Component, Neutral-Cure Silicone Sealant for Glazing Tremsil® 600 is a single-component, neutral-cure, fast-skinning, medium modulus silicone sealant. The sealant cures to a flexible rubber when exposed to moisture present in the air. Basic Uses Tremsil 600 is ideal for use as an in-plant glazing sealant for applications that include back-bedding, cap, heel and toe beads, and sash joinery. Tremsil 600 is compatible with most common porous and non-porous building components and has excellent adhesion to aluminum, stainless steel, metals, glass, plastics, rigid PVCs, wood, brick, concrete and painted surfaces. Tremsil 600 is also designed for application through automated glazing equipment (x-y tables).

Dymonic® FC

High-Performance, Fast-Curing, Single-Component, Hybrid Sealant Dymonic® FC is a high-performance, fast-curing, single-component, low-modulus, hybrid sealant, formulated with proprietary silane end-capped polymer technology. Basic Uses Dymonic FC is a durable, flexible, sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. Typical applications for Dymonic FC include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, door, panels), EIFS, aluminum, masonry and vinyl siding.

Dymonic® 100

High-Performance, High-Movement Single-Component, Polyurethane Sealant Dymonic® 100 is a high-performance, high-movement, single-component, medium-modulus, low-VOC, UV-stable, non-sag polyurethane sealant. Basic Uses Dymonic 100 is a durable, flexible sealant that offers excellent performance in moving joints and exhibits tenacious adhesion once fully cured. Typical applications for Dymonic 100 include expansion and control joints, precast concrete panel joints, perimeter caulking (windows, doors, and panels), aluminum, masonry and vinyl siding. Dymonic 100 is also an excellent choice as a fluid applied flashing material in rough opening perimeters for fenestration/window, door and curtain wall applications.

Vulkem® 116

Textured, Single-Component Polyurethane Sealant Vulkem® 116 is a textured, single-component, moisture-curing, gun-grade polyurethane sealant. Basic Uses Vulkem 116 is an excellent general-purpose sealant designed for use on poured and precast concrete, masonry work, window and door perimeters, and similar types of construction joints. Vulkem 116 is approved for exterior use only.

Vulkem® 45SSL

Semi-Self-Leveling, Single-Component, Polyurethane Sealant Vulkem® 45SSL is a semi-self-leveling, single-component, moisture-curing, low-modulus, polyurethane sealant. Basic Uses Vulkem 45SSL is formulated for use in expansion joints in sidewalks, swimming pool decks, plazas, floors and any other horizontal surfaces with slopes up to 6% (e.g. 1 rise for every 16 run).

Dymeric® 240FC

Fast-Curing, Multi-Component Polyurethane Sealant Dymeric® 240FC is a gun-grade, multi-component, chemically-curing, polyurethane sealant that includes a tintable base, curative packet, and a choice of 70 standard colors. A Limestone Pretinted version is also available. Basic Uses Dymeric 240FC applications range from pre-cast tilt-up concrete, masonry, and exterior insulating and finishing systems (EIFS), to metal curtain walls, and perimeter joints around doors and windows. It can also be used in certain water immersed applications.

THC-901

Multi-Component, Polyurethane Sealant for Horizontal Expansion Joints THC-901 is a multi-component, polyurethane sealant for horizontal expansion joints that includes a tintable base, curative packet, and a choice of 70 standard colors. Basic Uses THC-901 is a semi-self-leveling joint sealant that can handle sloped traffic areas up to 10%. THC-901 can be used in parking garages, plazas, terrace decks, floors and sidewalk joints.

Vulkem® 445SSL

Field-Tintable, Semi-Self-Leveling, Multi-Component, Polyurethane Sealant Vulkem® 445SSL is field-tintable, semi-self-leveling, multi-component, moisture-curing, polyurethane sealant that includes a tintable base and a choice of 70 standard colors. Basic Uses Vulkem 445SSL is formulated for use in expansion joints in sidewalks, swimming pool decks, plazas, floors and any other horizontal surface with slopes up to 6% (e.g. 1 rise for every 16 run).

Acoustical Curtainwall Sealant

One-Part, Non-Skinning, Sound Damping Sealant Tremco Acoustical/Curtainwall Sealant is a single component, non-skinning, non-hardening synthetic rubber sealant. Basic Uses Tremco Acoustical/Curtainwall Sealant was developed for acoustical sealing of drywall partitions, curtainwalls, corridors and party walls. This sealant also is used as a lap joint and perimeter sealant for polyethylene vapor barriers over fiberglass batt or other insulations and may be used in contact with polystyrene.

Gutter Seal

Gutter Sealing Elastomeric Sealant Gutter Seal is a one-part, high quality blend of synthetic rubber and resin. It exhibits excellent elastomeric properties while maintaining superior adhesion under ponded water conditions. Basic Uses Gutter Seal has been specifically designed for use in gutter and rainwater applications and is ideally suited for metal-to-metal and metal-to-plastic joinery. Commonly found in and around the eavestrough.

Tremco® 830

Thermoplastic, Elastomeric Glass and Siding Sealant Tremco® 830 is a one-part, thermoplastic elastomer that provides a high-performance, flexible seal in glazing and siding applications. Basic Uses In glazing applications, Tremco 830 is used for face bedding, cap beads and sealing miter joints in window profiles. For siding applications, use with sill trim, flashings, fascia, J-trim, F-channel, and crown molding. Also used for sealing the perimeters of wood, PVC, and aluminum residential windows and doors.

Tremco® Butyl Sealant

General Purpose Butyl Sealant Tremco® Butyl Sealant is formulated from a blend of butyl rubber and polyisobutylene to form an economical, flexible sealant. Basic Uses Tremco Butyl Sealant is used for sealing joints in applications such as curtainwall joints, metal panel joining, bedding thresholds, secondary glazing seals, and areas where a seal is required against Tremco Neoprene or EPDM gaskets.

Tremflex® 834

Siliconized Acrylic Latex Sealant Tremflex® 834 is a pure acrylic latex sealant formulated to provide a fast-setting pliable seal with minimal shrinkage. Basic Uses Tremflex 834 can be used for general purpose interior and exterior caulking and as a back bedding glazing compound. It is also highly recommended as an acoustical seal in the construction of interior walls, ceilings and floors. It is suitable for use on vinyl, aluminum and wood siding as well as on bathroom and kitchen fixtures.

TREMGrip®

Single-Component, Quick Tack Adhesive TREMGrip® is a one-component, non-sag, elastic adhesive based on hybrid polymers. It has been developed to bond materials to a variety of substrates where an adhesive with extremely high initial green strength is required. Basic Uses TREMGrip is perfect for indoor/outdoor use on a variety of substances including, but not limited to drainage board for backfilled applications, air barrier applications and insulation to air barriers and below-grade membranes

TREMprime™ Non-Porous Primer

TREMprime™ Non-Porous Primer is a low-VOC, water-based, quick-drying, one-part primer used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics. Basic Uses Non-porous surfaces and urethane sealants. A low-VOC, waterbased, quick-drying, one-part primer. TREMprime Non-Porous Primer is not a film-forming primer. It is used as an adhesion promoter for urethane sealants and coatings on non-porous surfaces such as metals and plastics. Apply with a clean cloth. Remove all excess primer from cloth to ensure a very thin layer is applied. Dry time is 15 min at 70 °F (21˚C). Primer must be completely dry before applying sealant or coating. Urethane sealants and coatings can be applied up to 8 hr after primer has been applied. After 8 hr, the surface must be cleaned with a Tremco approved solvent and reprimed with TREMprime Non-Porous Primer.

TREMprime™ Silicone Metal Primer

TREMprime™ Silicone Metal Primer is a one-component primer used to enhance adhesion of silicone sealants on nonporous surfaces such as metals and plastics. Basic Uses Non-porous surfaces, silicone sealants. A one-component primer used to enhance adhesion of silicone sealants on non-porous surfaces such as metals and plastics. Tremco Silicone Metal Primer is also approved for Structural Glazing applications. Apply with a clean cloth. Remove all excess primer from cloth to ensure a very thin layer is applied. Dry time is 15 min at 70 °F (21 ˚C). Primer must be completely dry before applying sealant. Silicone sealants can be applied up to 6 hr after primer has been applied. After 6 hr, the surface must be cleaned with IPA and reprimed with Tremco Silicone Metal Primer.

TREMprime™ Silicone Porous Primer

TREMprime™ Silicone Porous Primer is a one-component primer used to enhance adhesion of silicone sealant to porous surfaces such as concrete and limestone. Basic Uses Porous surfaces, silicone sealants. One-component primer used to enhance adhesion of silicone sealant to porous surfaces such as concrete and limestone. Apply generously with a clean cloth. Dry time is 30 to 45 min at 70 °F (21˚C). Primer must be completely dry before applying sealant. Silicone sealants can be applied up to 8 hr after primer has been applied. After 8 hr, the surface must be cleaned with IPA and reprimed with TREMprime Silicone Porous Primer.

Vulkem® Primer #171

Vulkem® Primer #171 is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates where Vulkem® urethane sealants, membranes or coatings will be applied. NOT for use in Canada. Basic Uses Porous surfaces, urethane sealants, Vulkem Coating Systems and TREMproof membranes. Quick-drying, one-part, moisture-curing primer. It is used as an adhesion promoter for Vulkem brand urethane sealants and coatings and TREMproof membranes on porous surfaces such as concrete and wood. Apply generously with a clean brush or roller. Do not apply in excess where it will puddle or pond. At 70 °F (21˚C), allow 30 to 45 min for primer to become tacky before applying sealant, coating or membrane. Do not allow primer to dry completely. Do not apply sealant or coating if primer becomes hard or glossy. If it does, clean with a Tremco approved solvent and coat with Vulkem Primer 191 Primer.

Dymonic® Simple Seal

Extruded Polyurethane Bridge Dymonic® Simple Seal is a medium-modulus, preformed polyurethane extrusion specifically designed to bridge joints under elastomeric wall coatings. Dymonic Simple Seal is typically bonded with Dymonic 100 Polyurethane Sealant to a wide range of substrates to provide a watertight seal. Tremco Dymonic Simple Seal is designed for both new construction and restoration work involving expansion joints, window/door perimeters, EIFS joints, parapet walls, skylights, transition seals, curtain wall joints, sheet metal roof joints and other lap joints that will be coated over with an elastomeric coating.

Spectrem® Simple Seal

Extruded Silicone Bridge Spectrem® Simple Seal is an ultra-low modulus, preformed silicone extrusion specifically designed to have high elongation properties. Simple Seal is typically bonded with Spectrem 1 Silicone Sealant to a wide range of substrates to provide a watertight seal. Basic Uses Tremco Spectrem Simple Seal is designed for both new construction and restoration work involving window perimeter, EIFS joints, parapet walls, skylights, aluminum window seals, transition seals, curtain wall joints, sheet metal roof joints, and other lap joints.

Willseal® 250

Horizontal Seal with Traffic Grade Silicone Willseal® 250 is a pre-compressed, self-expanding open micro-cell polyurethane foam impregnated with a hydrophobic, acrylic polymer sealing compound coated with a factory-applied silicone sealant. It is designed to provide a watertight, dust-proof, airtight, noise-reducing, thermally insulating, and UV stable primary seal that does not require invasive anchoring for installation. Basic Uses Primary horizontal expansion for vehicular and pedestrian traffic Parking Garages Stadiums Plaza Decks on grade Airport taxiways and runways ac_unit Do not install when substrate or ambient temperatures are below 14°F (-10°C) help whatshot Do not install when substrate or ambient temperatures are above 95°F (35°C) help

Willseal Coreseal

Flexible Closed Cell Foam Willseal® Coreseal is a lightweight, preformed closed-cell ethylene vinyl acetate (EVA) copolymer foam. It is designed to provide a watertight, dust-proof, airtight, noise-reducing, thermally insulating and UV stable primary seal that does not require invasive anchoring for installation. Willseal Coreseal is engineered to perform in both horizontal and vertical applications. Basic Uses Primary horizontal or vertical expansion joints Control joints Below grade applications Parking garage expansion joints Highway longitudinal and transverse joints Stadium Plaza Decks Bridge expansion joints

Willseal Color Coreseal H

Flexible Closed Cell Primary Horizontal Foam Willseal® Coreseal H is a lightweight, preformed closed-cell ethylene vinyl acetate (EVA) copolymer foam with a pre-cured, traffic-rated factory-applied sealant. It is designed to provide a watertight, dust-proof, airtight, noise-reducing, thermally insulating and UV stable primary seal that does not require invasive anchoring for installation. Basic Uses Horizontal expansion joints Below grade applications Highway longitudinal ad transverse joints Bridge & parking expansion joints Seismic, large & retrofitjoints Larger joints requiring an architectural finish

Willseal FR-H

Pre-Compressed Fire Rated Horizontal Expansion Seal Willseal® FR-H is a fire-rated, pre-compressed, watertight, UV stable foam, with an integral smoke barrier within the foam body, sound-attenuating expansion joint with a pre-cured, traffic-rated factory-applied sealant applied to the face. FR-H is comprised of a fire-retardant impregnated foam designed to be used in horizontal expansion joints by itself, but it can also be used behind any other expansion joint cover, plate or filler where joint depth allows. Basic Uses Primary horizontal expansion joints with vehicular & pedestrian traffic Parking garages Stadiums Plaza decks on grade Airport runways Ceiling applications

Willseal® Seismic HS

Pre-Compressed Horizontal Expansion Seal Willseal® Seismic-HS is a pre-compressed, self-expanding open micro-cell polyurethane foam impregnated with a hydrophobic, acrylic polymer and coated with a factory-applied silicone sealant. It is designed to provide a watertight, dust-proof, noise-reducing, thermally insulating, and UV stable primary seal that does not require invasive anchoring for installation. Basic Uses Primary construction joints Retrofit and seismic joints Joints in pre-cast concrete floor to wall joints Exterior panel systems (masonry, granite, metal, curtainwalls)

Willseal 250-R

Reinforced Horizontal Seal with Traffic Grade Silicone Willseal® 250-R is a patent-protected expansion joint system which combines the performance and reliability of Willseal 250 with reinforcing members positioned beneath the sealant face to support higher point loads. It is typically used as a joint sealant for both interior and exterior high foot traffic areas, engineered to perform in horizontal applications. Basic Uses Primary horizontal expansion for vehicular & pedestrian traffic Parking garages Stadiums Plaza decks Skyways Mall entrances Concourses ac_unit Do not install when substrate or ambient temperatures are below -14°F (-26°C) help whatshot Do not install when substrate or ambient temperatures are above 95°F (35°C) help

Willseal 150

Primary Vertical Joint Application Willseal® 150 is a pre-compressed, self-expanding polyurethane foam joint seal, engineered to perform as a highly flexible, weather-tight, primary seal in vertical exterior applications. The high-density polyurethane foam is impregnated with a modified flame retardant, hydrophobic, UV stable acrylic resin and treated with a pressure-sensitive adhesive (PSA) on one side for ease of installation. Willseal 150 self-expands to fill the joint creating a permanent, elastic, vapor-permeable weathertight seal. Basic Uses Primary expansion, control, isolation & retrofit joints Primary construction joints Joints in pre-cast concrete, masonry, brick and facades Roofing and insulated metal panels Exterior insulation finish systems (EIFS) Primary seal in starter track assemblies for window wall Interior vapor, dust, acoustical and air control Manufactured housing and log homes

Willseal 600/600S

Breathable Primary (600) or Secondary (600S) for Vertical Applications Willseal® 600 is a pre-compressed, self-expanding foam joint seal, engineered to perform as a highly flexible, weather-tight, primary seal in vertical exterior applications. The high-density polyurethane foam is impregnated with a modified flame retardant, hydrophobic, UV stable acrylic resin and treated with a pressure-sensitive adhesive on one side for ease of installation. Willseal 600 self-expands to fill the joint creating an elastic, vapor-permeable, weathertight seal. Willseal® 600S is a pre-compressed, self-expanding foam joint seal, engineered to perform as a highly flexible, secondary seal in vertical exterior applications. Willseal 600S is specifically designed to provide the ideal foundation for a large variety of wet sealants, such as silicone, polyurethane, polysulfide, and acrylic. Basic Uses Primary seal in starter track assemblies for window wall (600 Only) Expansion, control, isolation & retrofit joints (600 Only) Secondary expansion, control, isolation & retrofit joints (600S Only) Window and flashing applications (600S Only) Secondary construction joints behind a wet seal Joints in pre-cast concrete, masonry, brick, and facades Roofing and insulated metal panels Exterior insulation finish systems (EIFS) Interior vapor, dust, acoustical, and air control

Willseal Color Coreseal V

Flexible Closed Cell Foam Willseal® Coreseal V is a lightweight, preformed closed-cell ethylene vinyl acetate (EVA) copolymer foam with a pre-cured, factory-applied sealant. It is designed to provide a watertight, dust-proof, airtight, noise-reducing, thermally insulating and UV stable primary seal that does not require invasive anchoring for installation. Basic Uses Vertical expansion joints Primary construction joints Expansion, control and isolation joints Retrofit & Seismic joints Pre-cast concrete walls, tilt-up walls Exterior panel systems - Masonry, Granite, Metal, EIFS, Curtain Walls Joints requiring a resilient, waterproof seal Larger joints requiring an architectural finish

Willseal FR-V

Pre-Compressed Fire Rated Vertical Expansion Seal Willseal® FR-V is a fire-rated, pre-compressed, watertight, UV stable foam, with an integral smoke barrier within the foam body, sound-attenuating expansion joint with a pre-cured, factory-applied sealant applied to the face. FR-V is comprised of a fire-retardant impregnated foam designed to be used in vertical expansion joints by itself, but it can also be used behind any other expansion joint cover, plate or filler where joint depth allows. Basic Uses Vertical fire-rated expansion joint systems Primary construction joints Expansion, control, and isolation joints Retrofit & seismic joints Joints requiring a resilient, waterproof seal Larger joints requiring an architectural finish

Willseal Seismic

Pre-Compressed Expansion Seal Willseal® Seismic is a pre-compressed, self-expanding open micro-cell polyurethane foam impregnated with a hydrophobic, acrylic polymer and coated with a factory-applied silicone sealant. It is designed to provide a watertight, dust-proof, noise-reducing, thermally insulating, and UV stable primary seal that does not require invasive anchoring for installation. Basic Uses Primary expansion, control, isolation joints Primary construction joints Retrofit & seismic joints Vertical expansion joints (Willseal Seismic HS for horizontal joints) Joints in pre-cast concrete, masonry, brick, and facades Exterior insulation finish systems (EIFS) Exterior panel systems (masonry, granite, metal, curtainwalls) ac_unit Do not install when substrate or ambient temperatures are below 14°F (-10°C) help whatshot Do not install when substrate or ambient temperatures are above 95°F (35°C) help

Willseal® Acousti-Seal

Sound and Dust Barrier Willseal® Acousti-Seal is a compressible type joint sealant for both static vertical, and horizontal joints on a vertical plane, for use in applications where interior sound control is needed. Not intended for movement joints. Comprised of a fire resistant acrylic impregnated polyurethane foam with factory coated silicone sides, Acousti-Seal can be color matched to blend in with the surrounding and for a better aesthetically pleasing appearance. Typically used as an interior joint seal that blocks sound, dust, drafts, heat and cold in interior spaces such as offices, quiet rooms, lobbies, and conference rooms. Basic Uses Window to wall Moveable or permanent partitions Head of wall Curtain wall Partition to wall

Willseal FR/SAF-V

Pre-Compressed Fire Rated Vertical Safety Expansion Seal Willseal® FR/SAF-V is a fire-rated, pre-compressed, watertight, UV stable foam, with an integral smoke barrier within the foam body, sound-attenuating expansion joint with a pre-cured, factory-applied pick-resistant sealant applied to the face. FR-V is comprised of a fire-retardant impregnated foam designed to be used in vertical expansion joints by itself, without the addition of an intumescent sealant on the foam surface. Basic Uses Vertical fire-rated expansion joint systems Primary construction joints Expansion, control, and isolation joints Retrofit & seismic joints Joints requiring a resilient, waterproof seal Larger joints requiring an architectural finish

Willseal® Color Coreseal SAF-V

Flexible Closed Cell Safety Vertical Foam Willseal® Coreseal SAF-V is a lightweight, preformed closed-cell ethylene vinyl acetate (EVA) copolymer foam with a pre-cured, factory-applied pick-resistant sealant. It is designed to provide a watertight, dust-proof, airtight, noise-reducing, thermally insulating and UV stable primary seal for areas that can be easily damaged or vandalized in institutional or other public buildings. Basic Uses Vertical expansion joints Primary construction joints Expansion, control, and isolation joints Retrofit & seismic joints Pre-cast concrete walls, tilt-up walls Exterior panel systems - Masonry, Granite, Metal, Curtain Walls Joints requiring a resilient, tamper resistant seal Larger joints requiring an architectural finish

Willseal Seismic SAF-V

Pre-Compressed Seismic Safety Vertical Expansion Seal Willseal® Seismic SAF-V is a pre-compressed, self-expanding open microcell polyurethane foam impregnated with a hydrophobic, acrylic polymer and coated with a factory-applied pick-resistant sealant. It is designed to provide a watertight, dust-proof, noise-reducing, thermally insulating, and UV stable primary seal for areas that can be easily damaged or vandalized in institutional or other public buildings. Basic Uses Primary expansion, control, isolation Primary construction joints Retrofit & seismic joints Vertical expansion joints Joints in pre-cast concrete, masonry, brick, and facades Exterior panel systems (masonry, granite, metal, curtainwalls) ac_unit Do not install when substrate or ambient temperatures are below 40°F (4°C) help whatshot Do not install when substrate or ambient temperatures are above 95°F (35°C) help

ExoAir® Flex Foam

Flexible, Low-Expansion Polyurethane Foam ExoAir® Flex is a single-component, high performance, gun-grade polyurethane flexible foam that performs as a thermal barrier. With an industry leading movement range of +/-15% (Movement Accommodation Factor of 30%), ExoAir Flex, part of the T3 Building Solutions System, protects against thermal expansion and contraction. ExoAir Flex is CFC-free and can be applied over a wide temperature range, making it a reliable, fourseason solution. Basic Uses ExoAir Flex is best suited as a thermal and sound barrier to be used in the perimeters around windows and doors. The recommended application temperature is from 27 to 95 °F (-3 to 35 °C).

ExoAir® LEF

Low-Expanding Polyurethane Foam ExoAir® LEF is a single-component, CFC-free, all-season, high performance, gun-grade polyurethane foam that performs as a thermal barrier. ExoAir LEF is part of the Tremco T3 building envelope transition toolbox. Basic Uses The ExoAir LEF is best suited around window and door frame joints but can also be used as an effective joint filler in hidden applications. LEF is most commonly used as a thermal and sound barrier. The product can be installed in temperatures ranging from 14 to 95° F (-10 to 35° C).

TREMproof® 201/60

Fluid-Applied, Elastomeric Waterproofing TREMproof® 201/60 is a high-solids, VOC compliant, modified polyurethane waterproofing membrane. It is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel. (Trowel grade intended for detailing work only). Basic Uses TREMproof 201/60 is designed for use on backfilled walls, primarily on concrete and masonry.

TREMproof® 250GC

Single-Component, Rapid Curing, Fluid-Applied Elastomeric Waterproofing Membrane TREMproof® 250GC is a rapid-curing, high-solids, VOC-compliant modified polyurethane waterproofing membrane that can be applied to damp and green concrete. TREMproof 250GC is a one-part moisture-curing elastomer available in three viscosities: Self-Leveling (SL), Roller (R) and Trowel (trowel intended for detailing work only). Basic Uses TREMproof 250GC is designed for use on backfilled walls, split slab applications, planters and submerged conditions.

TREMproof® 260

Single-Component Asphalt Emulsion Waterproofing Membrane TREMproof® 260 Waterproofing Membrane is a polymer-enhanced, single-component, fluid-applied, asphalt emulsion, below-grade waterproofing membrane. It is available in both a spray and roller grade. Basic Uses Typical applications for TREMproof 260 include foundation walls, retaining walls and most backfilled applications. TREMproof 260 is also designed for use in approved methane barrier applications. Contact Tremco Technical Services for additional information regarding methane barrier applications.

TREMproof® 6100

Multi-Layered, Fabric-Reinforced, Hot-Applied, Rubberized Asphalt Waterproofing Membrane TREMproof 6100® is a one-part, 100% solids, hot-applied, rubberized asphalt waterproofing membrane. TREMproof 6100 can be formulated with up to 25% recycled content. Contact your local Tremco Sales Representative for additional information. Basic Uses TREMproof 6100 is ideally suited for new and remedial waterproofing applications. It is applied to horizontal concrete surfaces and is formulated exclusively for application to the top level of structures, including applications such as plaza decks, roof decks and unexposed top-level parking areas. EQUIPMENT: Heating of TREMproof 6100 is accomplished utilizing a double-jacketed, oil-bath melter with mechanical agitation, specifically designed for applying non-direct fired hot rubberized asphalt waterproofing membranes. Specific temperatures can be found in the data sheet.

TREMstop® Fyre-Sil

Gun-Grade Silicone Sealant TREMstop® Fyre-Sil is a gun-grade, neutral-cure silicone sealant designed for use in firestop applications, including both joints and through-penetrations. Self-Leveling Silicone Sealant TREMstop® Fyre-Sil SL is a self-leveling, neutral-cure silicone sealant designed for use in firestop applications, including both joints and throughpenetrations. Basic Uses TREMstop Fyre-Sil is for use on metal pipe, plastic pipe, cables, cable trays, ducts and multiple through-penetrations as well as static joints and dynamic joints in concrete, wood floor/ceiling and gypsum wall assemblies and perimeter fire barrier joints. TREMstop Fyre-Sil SL is for use on metal pipe, plastic pipe, cables, cable trays, ducts and multiple through-penetrations as well as static joints and dynamic joints in concrete, wood floor/ceiling and gypsum wall assemblies and perimeter fire barrier joints.

TREMproof™ Amphibia™

Sheet-Applied Waterproofing Membrane TREMproof™ Amphibia™ waterproofing membrane is self-healing, self-sealing and self-repairing. It has three active layers - a watertight EPDM barrier, an active core with the ability to seal when penetrated and an active barrier which seals the overlap and helps resist lateral movement of water. Also, a non-woven fabric layer promotes the mechanical adhesion of the membrane to the concrete. TREMproof Amphibia Grip Tape is a double-sided, synthetic rubber composite membrane tape that seals the seam overlaps during installation. This butyl tape bonds strongly to the TREMproof Amphibia membrane, while the fleece facing enhances the tapes ability to adhere to concrete. TREMproof Amphibia waterproofing membrane is designed for use over lagging on blindside walls, below-grade walls, pile caps, grade beams, under slab and buried forms such as elevator pits.

TREMproof™ 560A

Self-adhesive Waterproofing Membrane TREMproof 560A Waterproofing Membrane is a self-adhesive waterproofing membrane specifically designed for below grade waterproofing. The membrane is composed of SBS modified bitumen with a tri-laminated woven polyethylene facer. A silicone release paper protects the adhesive side of the membrane. Basic Uses Poured concrete and CMU backfilled walls. Approved for use of Nudura® Insulated Concrete Forms.

Paraseal®

HDPE/Bentonite Sheet Membrane Dual Waterproofing System Paraseal® is a sheet waterproofing membrane consisting of 15 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. Basic Uses Paraseal is designed for use on backfilled walls. It may be used on damp or green concrete. Alternative versions of Paraseal are available for lagging, split slab, under slab and methane barrier conditions.

Paraseal® GM

HDPE/Bentonite Sheet Membrane Dual Waterproofing System Paraseal® GM is a sheet waterproofing and methane-mitigating membrane consisting of 20 mils of HDPE and expandable, granular bentonite. The composite weight of the material is up to 1.0 lb/ft², creating a dual waterproofing system. The HDPE extends beyond the bentonite on the perimeter edges to create a clean surface for Para JT Tape and Parastick n Dry Tape installation. Basic Uses Paraseal GM is designed for use in post-installation submerged conditions on backfilled walls. It may be used in under-slab and split-slab conditions.

TREMstop® Fire Mortar

Firestopping Mortar TREMstop® Fire Mortar is a one-part, fast setting, fire resistive microsilica compound. Basic Uses TREMstop Fire Mortar can be used as a complete Firestop system or to close down annular spaces making penetrations easier to treat with other TREMstop products.

TREMstop® FS Blanket

A Firestopping Fiber Blanket TREMstop® FS Blanket is a bio-soluble fiber insulation developed from a calcia, magnesia, silica chemistry to provide thermal insulation at operating temperatures up to 1832 °F (1000 °C). Basic Uses TREMstop FS Blanket is used as a packing material around metal pipe penetrations, cables and cable trays and in joints.

TREMstop® MCR

A Metal Restricting Collar TREMstop® MCR is a metal restricting collar for use with TREMstop SuperStrip to fabricate a firestop device in the field to fit a hub or uncommon pipe size. Basic Uses TREMstop MCR is used to direct the intumescent action of the TREMstop SuperStrip inward to close off any gaps or voids left when a combustible penetration burns away during a fire.

ExoAir® Primer

A VOC-Compliant Adhesive Primer ExoAir® Primer is a VOC-compliant adhesive primer formulated for use with ExoAir 110/110LT and ExoAir TWF. It can be applied to common construction substrates using a brush or roller. ExoAir Primer is specifically formulated for use with the ExoAir line of air barrier systems, ensuring compatibility with all components required to create the full assembly. Once on the substrate, ExoAir Primer dries quickly, allowing work to proceed without delay. Basic Uses ExoAir Primer is the primer required prior to the installation of ExoAir 110/110LT and ExoAir TWF.

Paraseal® Paraprimer™

Paraseal Accessory Primer Paraseal® Paraprimer™ is an adhesive primer formulated to prepare construction surfaces prior to application of Parastick n Dry, Superstop and various tapes. All Construction surfaces other than HDPE liner are always primed with Paraprimer prior to taping. Basic Uses Paraprimer helps create a bonding to any sound, clean surface and provides a flexible base to enhance adhesion.

TREMproof® Dual Waterproofing System (DWS)

TREMproof TRA Sheeting Embedded in TREMproof 250GC TREMproof® Dual Waterproofing System (DWS) is a dual membrane waterproofing system comprised of TREMproof TRA sheeting embedded into TREMproof 250GC. This unique waterproofing system is designed to have tenacious adhesion, long term durability, and remarkable chemical stability. The elastomeric properties of the systems components enable the complete assembly to withstand the most demanding waterproofing needs. Basic Uses The TREMproof Dual Waterproofing System (DWS) is designed to withstand the most rigorous waterproofing conditions. This system can be used to waterproof plaza decks, terraces, backfilled walls, planters, split slabs, and anywhere else where the ultimate in waterproofing protection is required.

TREMproof® Triple Waterproofing System (TWS)

TREMproof 260 Sprayed over Paraseal Waterproofing Membranes TREMproof® Triple Waterproofing System (TWS) is a blindside and underslab triple-layer waterpoofing assembly consisting of 20 mils of HDPE, expandable granular bentonite and a protective layer of spun-bonded polyester, coated with 60 dry mils of polymer-enhanced, liquid-applied asphalt membrane. This durable waterproofing system creates a physical bond to the concrete that eliminates the possibility of lateral water movement between the membrane and the structure. TWS provides superior defense against inclement weather conditions, preventing bentonite hydration prior to concrete placement. *Also available with 60 mil HDPE. Please consult your local Tremco Sales Representative for more information. Basic Uses Blindside walls (Cast-in-place and shotcrete). Under-slab/below slab on grade. Hydrostatic conditions* *Consult Tremco Technical Services for more information.

TREMDrain™

Multi-Composite Drainage and Protection Boards TREMDrain is a two-layer drainage mat consisting of a polystyrene core and nonwoven, needle-punched polypropylene fabric. The TREMDrain Series of mats are used with TREMproof and Paraseal waterproofing membranes serving both as a protection course and replacement for traditional pipe and stone drainage systems.

TREMDrain™ 1000

Multi-Composite Drainage and Protection Boards TREMDrain 1000 consists of a polystyrene core and nonwoven, needle-punched, polypropylene fabric. Available with or without the polymeric film (PF) attached to the back of the drainage core, it offers greater compressive strength than TREMDrain. The TREMDrain Series of mats are used with TREMproof and Paraseal waterproofing membranes serving both as a protection course and replacement for traditional pipe and stone drainage systems.

TREMDrain™ 2000NW

Multi-Composite Drainage and Protection Boards TREMDrain™ 2000NW is a three-layer drainage mat including a nonwoven, needle-punched, polypropylene fabric, polystyrene core and polymeric film. The TREMDrain Series of mats are used with TREMproof and Paraseal waterproofing membranes serving both as a protection course and replacement for traditional pipe and stone drainage systems.

TREMDrain™ 3000NW

Multi-Composite Drainage and Protection Boards TREMDrain™ 3000NW is a two-part prefabricated drainage material and protection board consisting of a formed polystyrene core covered on one side with a nonwoven, needle-punched, polypropylene fabric. This fabric allows water to pass into the drainage core while restricting the movement of soil particles. The plastic core provides compressive strength and moderate flow capacity. The TREMDrain™ Series of mats are used with TREMproof™ and Paraseal waterproofing membranes serving both as a protection course and replacement for traditional pipe and stone drainage systems.

TREMprime™ HR Primer

Hot-Applied Rubberized Asphalt Primer TREMprime™ HR Primer is a solvent-based modified bituminous primer for use in preparing porous and non-porous surfaces for application of Tremco hot-applied asphaltic fluids. Basic Uses TREMprime HR Primer promotes adhesion of Tremco asphaltic hot-applied fluids such as TREMproof 6100 and TREMproof 6100BM. Multi-purpose primer can be used on a variety of surfaces, such as concrete, masonry, metal, gypsum, and new or weathered bituminous surfaces. Can be applied by brush, short nap roller or airless spray system.

TREMprime™ QD Low-Odor Primer

TREMprime™ QD Low-Odor Primer is a quick drying, high-solids, solvent-based modified bituminous roofing primer for use in preparing porous and non-porous surfaces for application of TREMproof® 6100 waterproofing membranes. Basic Uses Porous and non-porous surfaces, TREMproof 6100. High-solids, solvent-based modified bituminous roofing primer for use in preparing porous and non-porous surfaces for application of TREMproof 6100.

TREMprime™ WB Primer

TREMprime™ WB Primer is a high-solids, water-based primer for use in preparing porous and non-porous surfaces for application of TREMproof 6100 and 6100BM. It can be applied with a roller or airless spray equipment. Basic Uses Porous and non-porous surfaces, TREMproof 6100 and 6100BM. High-solids, water-based primer for use in preparing porous and nonporous surfaces for application of TREMproof 6100 and 6100BM. Apply with roller or airless spray equipment.

TREMDrain™ Fittings and Accessories

TREMDrain™ Fittings & Accessories include Corner Guard, Universal Outlet, and Universal Tee. The Corner Guard assists in the flow of water around a backfilled walls outside corners. Corner Guard may also be used on inside corners. Universal Outlet transfers collected water from TREMDrain or TREMDrain Total Drain at the end of backfilled walls. Universal Tee transfers collected water from TREMDrain, TREMDrain 1000 or TREMDrain Total Drain on blindside walls and can also transer collected water from TREMDrain Total Drain on backfilled walls. Basic Uses TREMDrain accessories are designed for use with TREMDrain series of drainage mats.

TREMDrain™ GS

Multi-Composite Drainage and Protection Boards TREMDrain™ GS drainage mats consist of a perforated polystyrene core, with fabrics attached to both sides. Basic Uses TREMDrain GS is designed to be used in applications such as vegetative roof systems or greenscapes where some water retention is desired.

TREMDrain™ QSP

Quick Set Panel TREMDrain™ QSP (Quick Set Panel) is a three-part prefabricated drainage panel and protection board consisting of a formed perforated polystyrene core covered on dimple side with a nonwoven, needle-punched polypropylene filter fabric along with a breathable crosshatched fabric on the backside. The nonwoven fabric allows water to pass into the drainage core while restricting the movement of soil particles. The plastic core provides a compressive strength and allows the flow of water to the TREMDrain Total Drain System. The crosshatched fabric allows the panel to adhere to the wet tacky membrane and still allows the membrane to cure from the flow of air through the perforated drainage core. Basic Uses TREMDrain QSP is used in conjunction primarily with TREMproof® 250 GC, TREMproof 260, TREMproof 201/60 and Paraseal® Membranes. TREMDrain QSP is designed only for vertical application where a fast-tracked application with liquid applied membranes is desired. Note: TREMDrain drainage and protection materials are not for use beneath sand-set, vehicular paver applications.

TREMDrain™ S

Multi-Composite Drainage and Protection Boards TREMDrain™ S offers the highest compressive strength available within the TREMDrain Series and consists of a nonwoven, needle-punched, polypropylene fabric, polystyrene core and polymeric film backing. Basic Uses The TREMDrain Series of mats are used with TREMproof® and Paraseal® waterproofing membranes serving both as a protection course and replacement for traditional pipe and stone drainage systems.

TREMDrain™ Total Drain

Multi-Composite Drainage and Protection Boards TREMDrain™ Total Drain is a two-layer drainage mat with a unique polystyrene core that consists of a high-profile drainage section for water collection and flow around the structure and a transition section to connect to other TREMDrain series drainage mats. TREMDrain Total Drain also includes a nonwoven polypropylene filter fabric. Basic Uses The TREMDrain Series of mats are used with TREMproof® and Paraseal® waterproofing membranes serving both as a protection course and replacement for traditional pipe and stone drainage systems.

Vulkem® Primer #171

Vulkem® Primer #171 is a quick-drying, one-part, moisture-curing primer that enhances adhesion to concrete, plywood and other porous substrates where Vulkem® urethane sealants, membranes or coatings will be applied. NOT for use in Canada. Basic Uses Porous surfaces, urethane sealants, Vulkem Coating Systems and TREMproof membranes. Quick-drying, one-part, moisture-curing primer. It is used as an adhesion promoter for Vulkem brand urethane sealants and coatings and TREMproof membranes on porous surfaces such as concrete and wood. Apply generously with a clean brush or roller. Do not apply in excess where it will puddle or pond. At 70 °F (21˚C), allow 30 to 45 min for primer to become tacky before applying sealant, coating or membrane. Do not allow primer to dry completely. Do not apply sealant or coating if primer becomes hard or glossy. If it does, clean with a Tremco approved solvent and coat with Vulkem 191 Primer.

Tremco® Epoxy Primer

Two-Part Epoxy Primer Tremco® Epoxy Primer is a two-component (1:1) primer used as a compatible tie-in to create connectivity between TREMproof® below-grade waterproofing membranes, Vulkem® urethane coatings and ExoAir® air barrier membranes. Basic Uses Tremco Epoxy Primer may be applied to the surface of fully cured TREMproof 250GC, ExoAir 120, ExoAir 220, ExoAir 230, TREMproof 6100 HRA, Vulkem 350 and 350NF.

TREMprime™ Multi-Surface Urethane Primer

TREMprime™ Multi-Surface Urethane Primer is a two-component, quick-drying, epoxy-based, VOC-compliant primer primarily for use with Vulkem® urethane deck coating and liquid-applied waterproofing products. It may also be used with Vulkem and Tremco branded urethane sealants. Basic Uses Porous surfaces, interlaminary, urethane coatings. Low-VOC (<60 g/L), two-part epoxy primer used to condition and prep porous surfaces and existing coatings for application of a new coating layer. Apply with a short nap roller or brush evenly to the surface. Primer must dry completely before coating application as indicated by turning from milky-white to completely clear.

Vulkem® 191 Primer

Vulkem® 191 Primer is a quick drying, one-part, moisture-curing primer used as a urethane-to-urethane tie-in that prepares surfaces of cured Vulkem urethane sealants, coatings and membranes to be sealed with a fresh coat Basic Uses Porous surfaces, interlaminary, urethane sealants, coatings and TREMproof membranes. It is used to prepare surfaces of cured urethane sealants, coatings and TREMproof membranes that will be sealed with a fresh coat. Apply with a clean brush or roller. Do not apply in excess or allow to puddle. Use a short nap roller only. Dry time is 15 to 30 min at 70 °F (21˚C). Apply coating or sealant within 1 to 2 hr after application when primer is still tacky but does not come off substrate. Primer will yellow with time if left exposed. Do not apply in excess to other substrates not intended to be coated. Do not apply sealant or coating if primer becomes hard or glossy. If it does, clean with a Tremco approved solvent and reprime with Vulkem 191 Primer.

TREMprime™ VB Primer

Two-Component, Epoxy-Based, Vapor Barrier Primer TREMprime™ VB Primer is a two-component, epoxy-based solvent-free vapor barrier primer for concrete surfaces. Basic Uses TREMprime VB can be used to mitigate vapor drive caused by moisture in concrete. It can be used on new and existing concrete slabs and plywood surfaces with all Vulkem coatings.

TREMGard HB

TREMGard HB is a high-build, fiber reinforced, water-based, acrylic wall coating formulated to provide a tough, durable, flexible, and breathable film protection for concrete and masonry surfaces. TREMGard HB can be applied in a single coat up to 32 wet mils and can be used to bridge cracks. Basic Uses Exterior and interior above-grade substrates Concrete, cast-in-place or pre-cast Concrete masonry units (CMU) Previously painted masonry Brick Stone Exterior insulation finish systems (EIFS) Stucco Can be used on metal and PVC with TREMprime Non-Porous Primer

Asphalt Overlay (PUMA)

Waterproofing System TREMproof® PUMA is a cold-applied, waterproofing system that utilizes polyurethane-methacrylate (PUMA) technology. PUMA waterproofing system offers superior elongation over traditional MMA/PMMA technology systems. TREMproof PUMA is composed of a primer (Tremco PUMA Primer), a base coat (Tremco PUMA BC or Tremco PUMA BC LM), and a top coat (Tremco PUMA TC). All system components are cured using Tremco PUMA Initiator. Basic Uses TREMproof PUMA is a cold-applied system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. This waterproofing system is ideal for asphalt overlay.

Flashing System (PUMA)

Quick-Cure, Liquid Applied Flashing based on PUMA technology TREMproof® PUMA Flashing System is a quick-cure, liquid-applied system based on PUMA technology. This system cures within 30 minutes, even in temperature below freezing, and has tenacious adhesion to concrete and metal. TREMproof PUMA Flashing System is composed of a primer (Tremco PUMA Primer) and a UV stable base coat (Tremco PUMA Flashing). A top coat (Tremco PUMA TC) can be used when needed for aesthetic reasons. All system components are cured using Tremco PUMA Initiator. Basic Uses TREMproof PUMA Flashing System is a cold-applied flashing system designed for waterproofing penetrations, concrete slabs, and protecting occupied areas underneath from water damage. Additionally, the system will protect the concrete from the damaging effects of chloride, deicing salts, chemicals, gasoline, oils and anti-freeze.

Horizontal (PUMA)

Horizontal Waterproofing System – Ready for Use 1 Hour after Application TREMproof® PUMA is a cold-applied, waterproofing system that utilizes polyurethane-methacrylate (PUMA) technology. PUMA waterproofing systems offer superior elongation over traditional MMA/PMMA technology systems. TREMproof PUMA is composed of a primer (Tremco PUMA Primer) and a base coat (Tremco PUMA BC or Tremco PUMA BC LM). All system components are cured using Tremco PUMA Initiator. Basic Uses TREMproof PUMA is a cold-applied system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. This waterproofing system is ideal for split-slab, paver systems, planters and vegetated roofs.

Planters (PUMA)

Waterproofing System – Planter Application TREMproof® PUMA is a cold-applied, waterproofing system that utilizes polyurethane-methacrylate (PUMA) technology. PUMA waterproofing systems offer superior elongation over traditional MMA/PMMA technology systems. TREMproof PUMA is composed of a primer (Tremco PUMA Primer) and a base coat (Tremco PUMA BC or Tremco PUMA BC LM). All system components are cured using Tremco PUMA Initiator. Basic Uses TREMproof PUMA is a cold-applied system designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage. This waterproofing system is ideal for planters.

Decorative Flashing System (PUMA)

Quick-Cure, Liquid-Applied Flashing based on PUMA technology TREMproof PUMA Decorative Flashing System is a quick-cure, liquid-applied system based on PUMA technology. Components of the system can be initiated to cure within minutes, even in temperatures below freezing, and has tenacious adhesion to concrete and metal. Basic Uses TREMproof PUMA Decorative Flashing System is designed to be used as a replacement for stainless steel flashing. Potential applications include curb-to-curtain wall, curb-to-facade, deck-to-door, balcony slider doors, exposed window flashings and more. Polyurethane-methacrylate (PUMA) technology delivers extreme durability and crack-bridging capabilities at critical connection points. Significant labor savings vs. stainless steel flashing - no fabrication, bending, overlapping, soldering or open seams - and the ability to handle complex geometries with ease.

Tremco PUMA Components

Tremco Polyurethane-Methacrylate (PUMA) Technology provides superior elongation over traditional MMA/PMMA technology systems. These rapid curing systems feature extreme durability, fast cure independent of low temperature, crack bridging, tenacious adhesion and superior abrasion resistance. Basic Uses Decorative, heavy duty, helipad, pedestrian, pool decks, under tile, vehicular, water features, asphalt overlay, flashing system, horizontal and planters.

Paraseal® Paraprimer™

Paraseal® Accessory Primer Paraseal® Paraprimer™ is an adhesive primer formulated to prepare construction surfaces prior to application of Parastick n Dry, Superstop and various tapes. All Construction surfaces other than HDPE liner are always primed with Paraprimer prior to taping. Basic Uses Paraprimer helps create a bonding to any sound, clean surface and provides a flexible base to enhance adhesion.

TREMprime HR Primer

Hot-Applied Rubberized Asphalt Primer TREMprime® HR Primer is a solvent-based modified bituminous primer for use in preparing porous and non-porous surfaces for application of Tremco hot-applied asphaltic fluids. Basic Uses TREMprime HR Primer promotes adhesion of Tremco asphaltic hot-applied fluids such as TREMproof 6100 and TREMproof 6100BM. Multi-purpose primer can be used on a variety of surfaces, such as concrete, masonry, metal, gypsum, and new or weathered bituminous surfaces. Can be applied by brush, short nap roller or airless spray system.

TREMprime QD Low-Odor Primer

TREMprime® QD Low-Odor Primer is a quick drying, high-solids, solvent-based modified bituminous roofing primer for use in preparing porous and non-porous surfaces for application of TREMproof® 6100 waterproofing membranes. Basic Uses Porous and non-porous surfaces, and TREMproof 6100. High-solids, solvent-based modified bituminous roofing primer for use in preparing porous and non-porous surfaces for application of TREMproof 6100.

TREMprime WB Primer

TREMprime® WB Primer is a high-solids, water-based primer for use in preparing porous and non-porous surfaces for application of TREMproof 6100 and 6100BM. It can be applied with a roller or airless spray equipment. Basic Uses Porous and non-porous surfaces, TREMproof 6100 and 6100BM. High-solids, water-based primer for use in preparing porous and nonporous surfaces for application of TREMproof 6100 and 6100BM. Apply with roller or airless spray equipment.

Elastomeric Sheeting

Uncured Neoprene Sheeting Tremco® Elastomeric Sheeting is classified as a thermoset material made of highest quality uncured neoprene rubber at a thickness of 60 mils (1.52mm). Basic Uses Designed to provide a durable, flexible, tear-resistant bridge in areas of high movement such as expansion joints, construction joints and flashing where membrane waterproofing applications such as TREMproof® 6100, TREMproof 201/60 or TREMproof 250GC are being used.

HDPE Protection/Barrier Courses

HDPE Protection/Barrier Courses Basic Uses HDPE-20 Protective Vapor and Root Barrier: A 20-mil sheet that not only serves as a protection course but also acts as a vapor barrier in waterproofing applications. HDPE-40 Protective Root Barrier: A 40-mil sheet that prohibits aggressive growing roots from affecting the performance characteristics of a waterproofing membrane in planters and greenscape applications.

Tremco® 2011

Open Weave Glass-Reinforcing Fabric Tremco® 2011 is an open-weave fabric consisting of glass fiber yarn saturated with synthetic resins. The glass fiber in this product will not rot, mildew or wick water into the body of the coating material. Basic Uses Tremco 2011 is used as a reinforcing membrane incorporated into many types of coatings where strength and toughness are required. It is well suited for use around penetrations, on upturns and over cracks and non-moving joints.

Tremco® 2178

Asphalt-Impregnated Glass Ply Protection Course Tremco® 2178 Glass Ply Sheet is an asphalt-impregnated fiberglass ply felt marked with laying lines and lightly dusted on one side with a fine mineral parting agent. It features a fiberglass mat with uniform fiber distribution and high tensile strength in both directions. Basic Uses When fused to the waterproofing membrane, it provides both stability to the membrane and protection during placement of the asphaltic paving overlay. Please refer to the Permaphalt System data sheet for more information. Tremco 2178 may also be used in many other applications where a lightweight, asphalt-impregnated protection course is appropriate.

POWERply® Standard Smooth

Standard Smooth POWERply® Standard Smooth is a smooth surfaced, modified bitumen sheet used in conjunction with recommended waterproofing membranes as an extremely heavy-duty protection course, primarily in horizontal applications. Basic Uses POWERply Standard Smooth sheeting is used as a strong protection course for Tremco hot applied waterproofing membranes.

POWERply® Standard White Granular

White Granular POWERply® Standard White Granular is a rough-surfaced, modified bitumen sheet used in conjunction with waterproofing membranes as an extremely heavy-duty protection course, primarily in horizontal applications. Basic Uses POWERply Standard White Granular sheeting is used with Tremco hot applied waterproofing membranes.

Superstop

Bentonite Waterstop Material Superstop is a composite waterstop containing expandable, granular bentonite. One edge is layered with a pressure sensitive adhesive. Basic Uses Superstop is used for sealing cold joints in concrete and to prevent water migration through construction joints below grade. Properly installed under compaction, Superstop will stop the passage of water through a static cold joint or between two abutting impermeable surfaces. Superstop is also available in saltwater grade for use in approved brackish water conditions.

Tremco® 2450

Protection Board Tremco® 2450 Protection Board is an extruded, hollow-core polypropylene/polyethylene copolymer. The board is grey in color with a standard thickness of 0.08" (2.2 mm). Basic Uses Tremco 2450 provides protection for most commonly used waterproofing membranes, both during and after construction. Typical applications include plaza decks, roof terraces, landscaped decks, planters and foundation walls.

Tremco® 2550/2560

Asphaltic Protection Board 1/8" Asphaltic Protection Board 1/8" Tremco® 2550 Protection Board is a semi-flexible asphaltic sheet. It consists of a core made from a blend of asphalt, plasticizer and inert fillers. This core is sandwiched between two skins of an asphalt-saturated fiberglass. This composition is then molded and formed under heat and pressure into sheets. Asphaltic Protection Board 1/4" Tremco® 2560 Protection Board is a semi-flexible asphaltic sheet. It consists of a core made from a blend of asphalt, plasticizer and inert fillers. This core is sandwiched between two skins of an asphalt-saturated fiberglass. This composition is then molded and formed under heat and pressure into sheets. Basic Uses Tremco 2550 provides protection for approved waterproofing membranes during and after construction. The tough durable properties of the product make it ideally suited to withstand the shock and impact of rugged backfilling operations, as well as on-site foot traffic. It is used as a protective course for foundation walls, roof terraces, planters and tunnels. Tremco 2560 provides protection for approved waterproofing membranes during and after construction. The tough durable properties of the product make it ideally suited to withstand the shock and impact of rugged backfilling operations, as well as on-site foot traffic. It is used as a protective course for foundation walls, roof terraces, planters and tunnels.

Tremco® Retention Squares

Tremco® Retention Squares are high-density polyethylene reservoir boards designed for use in GreenScape and amenity deck applications where a deep-well type water storage system is desired. Basic Uses When additional water storage capacity is required, the board is used as an underlying reservoir holding 0.27 gal/sq.ft. when filled with mineral aggregate. The special underside channel profile provides high volume multi-directional drainage. Used in conjunction with Tremco 7611+ Moisture Retention Mat.

Tremco® Protection Mat

Membrane Protection Course An ultra lightweight, extremely tough 14-oz protection mat for waterproofing membranes in both vertical and horizontal applications. It is made of nonbiodegradable polyester and can be installed within minutes over a cured membrane to give maximum protection against backfill, poured slabs and other trades. Basic Uses Immediately available from your local Tremco Sales Representative, Tremco Distributor or Tremco Warehouse.

Tremco DualFlex®

Flashing Material for Hot-Applied Waterproofing Membranes Tremco DualFlex® is a reinforcing flashing that consists of a central strip of elastomeric SEBS rubber flanked on either side by an absorbent non-woven felt. The felt allows for easy integration of the flashing and the waterproofing membrane. The elastomeric SEBS rubber provides superior movement capability without compromising the waterproofing. Basic Uses Tremco DualFlex is used as a flashing material at joints, transitions in plane, horizontal-to-vertical transitions and any other situation in waterproofing where durable, reinforcing sheeting is desired. Tremco DualFlex is ideal for use with TREMproof® hot-applied waterproofing membranes and Vulkem® deck coating basecoats.

Reinforcing Fabrics

Reinforcing Fabric for Hot Fluid-Applied Membranes Spun-bonded polyester fabric consisting of a nonwoven fabric of continuous filament polyester fibers that are randomly arranged. These fibers are highly dispersed and bonded at the filament junctions. Basic Uses Used to reinforce hot fluid-applied membranes in multi-lift applications.

Paraseal Paragranular

Paraseal Accessory Paraseal® Paragranular™ is a premium, Wyoming type, high swelling, granular sodium bentonite. When in the presence of water, Paragranular reacts and forms an impervious waterproof gel. Basic Uses Paragranular is designed to work in conjunction with Paraseal products to form a waterproof transitional seal. It is used to form a cove at all horizontal to vertical transition, at floor/wall transitions and penetrations through horizontal surfaces, and to fill voids around irregularities. Saltwater grade Paragranular is also available upon request.

Paraseal Paramastic

Paraseal Accessory Paraseal® Paramastic™ an expandable mastic for use with Paraseal waterproofing membrane. Basic Uses Paramastic is used to protect against water leakage in the areas of where penetrations, honeycombs, unfilled ties or spalled concrete exists.

Paraseal Para JT

Paraseal Accessory Paraseal® Para JT™ is an adhesive joint tape compound formulated with cross-linked polymeric elastomers. Basic Uses Paraseal Para JT is utilized with Paraseal LG membrane in vaporproofing installations for effectively sealing around penetrations. When used with Paraseal GM, it creates double seals on all joints forming two complete and independent waterproofing systems. When used with Paraseal GM, it forms a natural gas and waterproof joint.

Paraseal Paramastic

Paraseal® Paramastic™ an expandable mastic for use with Paraseal waterproofing membrane. Basic Uses Paramastic is used to protect against water leakage in the areas of where penetrations, honeycombs, unfilled ties or spalled concrete exists.

Paraseal® Parastick n Dry™

Paraseal® Parastick n Dry™ is a laminate of bentonite applied to mesh with a pressure sensitive adhesive on one side. Basic Uses Parastick n Dry is used in conjunction with waterstops Parastop II, waterproofing membranes, Paraseal and Paramastic to assist in waterproofing difficult areas. It is used in blindside waterproofing applications to detail soldier piles and to wrap concrete imbeds such as pipe penetrations. Parastick n Dry can also be used to form water isolations such as in sandwich-slab applications.

Paraseal Paraterm Bar

Paraseal® Paraterm™ Bar is an aluminum alloy especially formulated to exhibit excellent holding power. Basic Uses When fastened through pre-cut holes, Paraterm Bar provides tight, straight and extremely long lived terminations, caulk troughs and drip edges.

Paraseal® Permanent Seam Tape

Paraseal® Permanent Seam Tape™ is a rubberized asphalt membrane laminated to a polyethylene reinforcing film. A removable release paper protects the adhesive membrane face until removed during installation. Basic Uses Permanent Seam Tape is used primarily for sealing the seams of Paraseal applications when flood testing is desired. It is used on all seams of Paraseal Saltwater Grade applications and with Paraseal LG when installed for vaporproofing. The inherent adhesive and waterproofing properties of the rubberized-asphalt membrane effectively seals the HDPE liner face on Paraseal products to render the bentonite a secondary back-up.